Real Property Industries, LLC
← All articles How to Verify Licensed Contractors: 7-Step Checklist How-to

How to Verify Licensed Contractors: 7-Step Checklist

Table of Contents

Last Updated: October 17, 2026

Why Verifying a Contractor's License Matters Before You Hire

Learning how to verify licensed contractors is the single most useful skill a homeowner can bring to a renovation project, and the steps below show you how to verify licensed contractors before you hire.

Hiring unlicensed workers is a costly gamble. Unlicensed contractors often skip permits, carry no insurance, and vanish when problems appear. If something goes wrong, you have little recourse beyond small claims court.

At Real Property Industries, LLC, we have worked as a licensed and insured exterior contractor in the greater Charleston and Huntington area for more than seven years. This guide gives you a repeatable 7-step process to check any contractor before you sign.

Here is the good news: the whole process takes about 30 minutes.

Step 1: Identify the Right State Licensing Board for the Trade

The right licensing authority depends on the trade and the state, and this is where most verification attempts stall. General contractors, electricians, plumbers, and HVAC contractors often report to different boards. Some states license at the state level. Others delegate to counties or cities.

Instead of guessing, work through a jurisdiction finder in this order:

  1. Start with the state agency that oversees professional and occupational licensing. Most states house contractor licensing under a department of licensing, a department of professional regulation, or a division of occupational and professional licensing. Search "[your state] contractor license lookup" and look for a .gov or state.us domain.
  2. Check the state board's list of licensed trades. Most boards publish a page listing every trade they regulate and the specific board or commission that oversees each one. Find your trade on that list before you search for a contractor.
  3. If your trade is not on the state list, check the county or city. Roofing, siding, fencing, and concrete are commonly licensed or registered at the local level in states that do not license them statewide. Call your county building department and ask whether the trade requires a local license, registration, or permit-only approval.
  4. Call the state consumer protection office as a backstop. If you still cannot identify the right board, ask which agency regulates the trade you need. Staff routinely route these calls.

A common mistake is assuming one license covers everything. A roofer may hold a specialty license that does not permit structural framing. An electrician's license does not authorize plumbing work.

Pro Tip Ask the contractor which board issued their license before you search. A legitimate contractor answers in seconds with a board name and license number. A vague answer ("it's through the state") is your first red flag.

Keep a short written record of what you find: the board name, the license number, the classification, and the date you checked. If a dispute arises later, that record is far more useful than a screenshot of a truck decal.

Step 2: Run a Contractor License Lookup by Name or License Number

A contractor license lookup is a search of the state's public licensing database. You can search by the contractor's legal business name or by the license number printed on their card or estimate.

Homeowner using a laptop to verify licensed contractors by comparing a business card against a state database
Homeowner using a laptop to verify licensed contractors by comparing a business card against a state database

Search by license number first. It is faster and avoids confusion when several businesses share a similar name. If you only have the company name, search the legal business name, not the trade name on the truck.

What to Confirm on the License Record

  • License status: It should read active, not expired or suspended.
  • License number and classification: Confirm it matches the trade you need.
  • License holder and business name: The legal name should match your contract.
  • Qualifying individual: Many states list the person who passed the exam. Confirm that person is still tied to the company.
  • Expiration date: A license close to renewal can lapse mid-project.
  • Disciplinary actions: Note any citations or complaints.

Most state databases update within days of a status change, but a few lag. If the record looks stale, call the board directly to confirm.

Step 3: How to Verify Contractor Insurance and Workers' Compensation

A license does not guarantee insurance. You have to check coverage separately, and this is where many homeowners stop too early.

Ask the contractor for a certificate of insurance and confirm it directly with the insurer. Call the number on the certificate, not the number the contractor gives you.

Workers' compensation matters more than most people realize. If an uninsured worker is hurt on your property, you may face liability. A contractor with employees should carry it.

Also ask about bonding.

Watch Out A certificate of insurance is easy to fake. Always call the insurer to confirm the policy is active and lists the correct business name. Skipping this call can leave you holding the bill for an injury on your own property.

Step 4: How to Check a Contractor's References and Complaint History

A contractor's complaint history tells you how they handle problems, not just how they build.

Then call references. Ask past clients three questions: Did the crew show up when promised? Was the final bill close to the estimate? Would you hire them again?

Get Started Today →

What most guides miss is that references chosen by the contractor are pre-screened. Ask for one reference from a project that finished at least a year ago.

You can also check the Better Business Bureau for complaint patterns, and review the FTC's guidance on hiring contractors for red flags in sales tactics.

Step 5: Questions to Ask a Contractor Before Hiring

The questions you ask a contractor before hiring reveal more than the answers. Watch how they respond.

  • Are you licensed, and what is your license number?
  • Can you provide a certificate of insurance and a bond number?
  • Who will be on my job site each day, and is that crew employed by you or subcontracted?
  • Will you pull the required permits, and who pays for them?
  • What is your written warranty, and what does it cover?
  • How do you handle change orders and schedule delays?
  • Can you provide three references from projects finished a year or more ago?

A professional answers each one without hesitation. Evasiveness, pressure to sign today, or a request for a large cash deposit up front are all reasons to walk away.

At Real Property Industries, LLC, we hand every client our license and insurance details before they ask. That should be normal, not exceptional.

What to Do When License Records Are Missing or Outdated

Sometimes the record simply is not there. The name does not match, the database shows an old address, or the license looks expired. Do not assume fraud, and do not ignore it. Work through a troubleshooting sequence before you decide.

  1. Call the licensing board and ask a staff member to confirm the record by phone. Online portals lag, and some boards update disciplinary records on a different schedule than license status. A phone confirmation gives you a name and a date to rely on.
  2. Ask the contractor to explain the mismatch in writing. A name change, a recent address update, or a license held by a qualifying individual rather than the business are all common and explainable. Get the explanation by email so the record is clear.
  3. Request a current certificate of insurance directly from the insurer. A license lookup does not establish current coverage, and a certificate the contractor forwards may be outdated. Call the number on the certificate, not the number the contractor gives you.
  4. Check whether a local jurisdiction issued a separate permit or registration. Many projects require a local permit even when the contractor holds a state license. The permit record is a second, independent confirmation that the contractor is authorized to work on your job.
  5. If the answers do not line up, walk away. Inconsistent explanations, pressure to sign before you finish checking, or a request for a large cash deposit up front are all reasons to stop.

Many states also offer an automated phone service for license checks. Use it when the online portal is down or unclear, and note the date and time of the call.

License, Registration, Certification, and Permit Are Not the Same Thing

One distinction trips people up more than any other: a license is not the same as a registration, a certification, or a local permit. Treating them as equivalent is how homeowners end up with an unlicensed crew that looked legitimate on paper.

  • A license is a credential issued by a state or local board after the applicant meets education, experience, and exam requirements. It authorizes the holder to perform a defined scope of work and is the strongest signal of trade competence.
  • A registration may only require a fee and a form. It confirms the business exists and has filed paperwork, but it does not necessarily test trade knowledge or authorize a scope of work.
  • A certification may cover a single skill, product line, or installation method. It is often issued by a manufacturer or trade association rather than a government board, and it does not replace a trade license.
  • A permit applies to one job. It confirms the work is authorized for that address and scope, but it does not establish that the contractor is licensed for future work.

Before you accept any credential, confirm which one you are actually looking at and which agency issued it. If the contractor cannot tell you the difference, that is itself useful information.

Watch Out A registration or certification number is not a substitute for a license number. If a contractor presents one when you asked for the other, ask again in writing and confirm the answer with the issuing agency.

If the record still does not resolve after these steps, document what you found, keep the contractor's written explanation, and consider a different contractor. A half-hour of follow-up is cheaper than a failed project.

Conclusion

Verifying a contractor takes half an hour and can save you thousands. Check the license, confirm the insurance, call the references, and ask hard questions. If any step feels off, trust that feeling.

When you are ready to move forward on roofing, siding, decking, landscaping, or snow removal, Real Property Industries, LLC makes the check easy. We are a licensed and insured contractor serving the area for more than seven years, and we share our credentials up front. Get started with Real Property Industries, LLC and hire with confidence.

Frequently Asked Questions

How can I verify a contractor's license if I can't find them in the state database?

If a contractor doesn't appear in the state licensing database, ask them directly for their license number and the name of the issuing board. Some contractors operate under a business name that differs from the name on the license, so search by the legal business name or the qualifying individual's name. If they still can't be found, call the state licensing agency's automated phone service or consumer protection line to confirm. A contractor who cannot produce a verifiable license number should not be hired for regulated work.

What should I do if a contractor's license is active but their insurance has lapsed?

An active license does not guarantee current insurance. Ask the contractor for a certificate of insurance and call the insurer directly to confirm the policy is active and covers the scope of your project. For workers' compensation, request proof and verify it with the state workers' compensation board. If coverage has lapsed, do not sign a contract until the contractor provides updated proof. Hiring an uninsured contractor can leave you responsible for injuries or property damage on your job.

How do I check a contractor's references and complaint history?

Ask for at least three recent references from projects similar to yours, then call each one and ask about timelines, quality, and whether the contractor returned to fix issues. For complaint history, search your state licensing board's online portal for disciplinary actions and citations. Also check the local Better Business Bureau and your state's consumer protection agency. A clean complaint record plus verifiable references gives you a much clearer picture than a license number alone.

What questions should I ask a contractor before hiring them for a roofing or siding project?

Ask for their license number and the name of the issuing board, then verify it yourself. Ask whether they carry general liability insurance and workers' compensation, and request certificates. Ask who will be on site daily, whether subcontractors will be used, and how change orders are handled. Request a written warranty and a payment schedule tied to milestones, not a large upfront deposit. Finally, ask for references from similar projects and follow up with each one.